Rock Screen Machine Rental USA

Rock Screen Machine Rental Usa

The USA Rock Screen Machine is a sorting, dewatering, desliming, dislodging, sorting sieving equipment. The vibration of the sieve body is used to loosen, layer and penetrate the material to achieve the purpose of material separation. The screening effect of the USA Rock Screen Machine has a great impact not only on the value of the product, but also on the efficiency of the next operation.

Causes of heating of USA Rock Screen Machine bearings

In general, during the test run and normal operation of the USA Rock Screen Machine, the bearing temperature should be kept in the range of 35 ~ 60 ° C. If it exceeds this temperature value, it should be cooled down. The main reasons for the high bearing temperature are as follows:

1, The Radial Clearance Of The Bearing Is Too Small

USA Rock Screen Machine bearings with too small radial clearance will cause the bearings to overwear and heat up, mainly because the bearings carry larger loads, higher frequencies, and the loads are constantly changing.

Solution: It is recommended that the bearing adopt a large clearance. If it is a normal clearance bearing, the outer ring of the bearing can be ground to a large clearance.

2, The Top Of The Bearing Gland Is Too Tight

There must be a certain gap between the gland of the USA Rock Screen Machine and the bearing outer ring, so as to ensure the normal heat dissipation of the bearing and a certain axial movement.

Solution: If the top of the bearing gland is too tight, it can be adjusted by the seal between the end cover and the bearing seat, and it can be adjusted to the gap.

3, Too Much Or Too Little Bearing Oil, Oil Pollution Or Oil Quality Mismatch

The lubrication system can ensure the normal operation of the USA Rock Screen Machine bearing, prevent the invasion and sealing of foreign objects, and also eliminate frictional heat, reduce friction and wear, and prevent the bearing from heating up too high. Therefore, during production, it is necessary to ensure the amount of grease and quality.

Solution: Regularly refill the bearing box according to the requirements of the equipment to avoid too much or too little oil. If there is a problem with the oil quality, it is necessary to clean, replace and seal the oil in time.


LEAVE YOUR MESSAGE
Popular Products
Construction Waste Crusher

Used Portable Construction Waste CrusherWhile using the urbanization process, growing the yield soaring construction waste, it's also introduced having a large

Quarry Crusher

Market of Used Portable Concrete Quarry Crusher in ChinaIn line with the Secretary of condition for Railways to develop a “long-term railway network plan,” 20

Gold Ore Crusher

Low Intensity Gold Ore Crusher Supplier in NigeriaLow Intensity Gold Ore Crusher is among the most engine of financial development, while using rapid progressio

Sand Washing Machine

China Rotary Tube Sand Washing Machine Development TrendFirst, Rotary Tube Sand Washing Machine Bigger Trend.Mainly for your mill, China has clearly introduced

Ultrafine Mill

Market of Kenya Small Aggregates Ultrafine MillWhile using current industry to market the ceaseless progression of numerous metals, non-metallic minerals for in

Ore Milling Equipment

Hammer Ore Milling Equipment With CycloneLately, the SBM Machine within the introduction, absorption of foreign advanced technology, according to innovative dev

Stone Crushing Equipment

Nigeria Used Small Hammer Stone Crushing Equipment Publication rack HotAccording to SBM sales personnel, Used Small Hammer Stone Crushing Equipment is actually


Recently updated

Raymond Mill

Market of Complete Stone Raymond Mill In PhilippinesPhilippine Science Technology in constant development, the industry’s needs are growing, customers need hig